Setting up and filling the
paddling pool
Setup should always be carried out by
an adult.
1. Select a suitable area that is clean and level
and has enough room to unpack and unfold
the paddling pool. Spread out the product
where it is to go. Make sure that it is in perfect
condition.
2. Fill the product slowly and do not leave the
product unattended while filling.
Emptying and folding up the
product
1. Open the drainage outlet and let the water
run out.
Note: Please take note of the local pro
visions for specific regulations on dis
posing of water from swimming pools.
2. Let the product dry completely before folding
it up.
Repairs
WARNING!
You should never attempt to repair larg
er damaged areas yourself.
Minor damage can be repaired using the repair
kit supplied. Empty all of the water before com-
mencing any repair work.
1. Clean the damaged area with an alco-
hol-based solution. Roughen the area
surrounding the tear or hole slightly using fine
sandpaper.
2. Now cut a patch that is large enough to cover
the damaged area plus 1.25cm around it on
all sides.
3. Apply the glue to the appropriate spot on
the paddling pool as well to on the patch
itself. Leave the glue to dry for approx. three
minutes.
4. Press the patch down with a soft object. Make
sure to work on an even surface without any
creases or folds. Using a rounded object,
gently remove any bubbles, moving outwards
from the centre.
6
GB/IE
5. Wait for at least 12 hours after the repair
before re-filling the paddling pool.
Storage, cleaning
Change the water in the product frequently –
especially in hot weather and when it is dirty!
When not in use, always store the product clean
and dry at room temperature. Only fold up the
product and place it in the storage pouch when
it is completely dry. The drainage outlet should
always be kept closed during storage. Only
clean the product with water or mild soapy water
– never with harsh cleaning agents. When storing
for the winter, do not place any sharp objects on
the product or apply talcum powder to it.
Disposal
Dispose of the product and packaging
materials in accordance with current
local regulations. Store the packaging
materials (foil bags, for example) out of
the reach of children. For further information
about disposal of the product no longer needed,
contact your local council. Dispose of the
product and the packaging in an environmental-
ly friendly manner.
The Recycling Code distinguishes
different materials to be returned for
recycling. The Code consists of the
recycling symbol for the recycling process and a
number that identifies the material.
Notes on the guarantee and
service handling
The product was produced with great care and
under continuous quality control. DELTA-SPORT
HANDELSKONTOR GmbH gives private end
customers a three-year guarantee on this product
from the date of purchase (guarantee period) in
accordance with the following provisions. The
guarantee is only valid for material and manu-
facturing defects. The guarantee does not cover
parts that are subject to normal wear and tear
and that are thus considered wear parts (e.g.
batteries) and it does not cover fragile parts such
as switches or parts that are made of glass.