Publicidad
Idiomas disponibles
Idiomas disponibles
4.
OPERATION
4.1
Danger note
DANGER
Risk of death due to electric shock
Do not plug in damaged power cables.
If there are signs of damage to the power cord,
replace it immediately with a new one.
The supply voltage and frequency must match the
data on the product label
- The 180° position (parking position) is not permitted.
Sharp bending of approx. 90° at the connecting piece is
not permitted.
Example of a correct parking position
Plug in the cable
Connecting the cable to the mains
Before each use carry out a function test: all LEDs in the
light beam must light up
WARNING
Eye injury warning
►
This product may emit dangerous radiation. Never
look directly into the light cone.
►
The radiation emitted by this product conforms to the
exposure limit value for reducing the risk of
photobiological hazards based on IEC 62471.
4.2
Halux N50-1 P FX / SX
ON / OFF Switch «A»
4.3
Halux N50-3 P FX / SX
Switch LED module on / off with "button B"
Set the desired illuminance in 5 dimming levels with
"buttons C"
Use "buttons D" to set the desired color temperature
according to the following table:
COLOUR
COLOUR
TEMP.
Blue
4400K
(neutral white)
White
3800K
(neutral white)
Red
3300K
(neutral white)
ENG
A
B
C
D
RECOMMENDATION
Ideal for the detection of
individual vessels and for
wound diagnostics
Ideal
for
general
examinations
Ideal for various types of
skin examinations
17
Publicidad
