Publicidad
Idiomas disponibles
Idiomas disponibles
Charging
EN
Place the charging base against a wall on level ground and connect it to a
1.
power source. Fully charge the appliance before first use.
Place the appliance on the charging base. When charging, the number on the display
2.
screen represents the current battery level as a percentage. When the number reaches
100, the battery is fully charged.
Note:
• If there is no operation within 10 minutes of being fully charged, the vacuum will enter sleep
mode. Please restart the appliance if you need to use it.
• To extend the battery life time, the battery keeps cooling down for about one hour automatically
after you have used the appliance for a long time.
7
7
How to Use
Filling the Clean Water Tank
Press the Clean Water Tank release button and pull the tank outwards to remove it.
Remove the cover of the Clean Water Tank and fill the tank with clean water. Install the
Clean Water Tank and ensure it clicks into place.
Adding Cleaning Fluid
For better cleaning performance, it is recommended to add 0.34 oz/10 ml detergent with
the bottle cap into the full Clean Water Tank, then shake gently and evenly for use.
Note: Do not add any liquids other than the officially-approved cleaner. The cleaner can be available
on the official online store.
WARNING : To reduce the risk of fire and electric shock due to internal component damage, use only
dreame AWH10 cleaning fluid intended for use with the appliance.
Starting Cleaning
Gently step on the brush cover and recline the appliance backwards. Press the power
switch
to start operating.
＜140°
EN
8
8
Publicidad
