Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
1.
In order to avoid the risk of overheating, it is recommended to use a direct power
socket, without the interposition of extension cables, power strips or multiple
plugs, 15 A and equipped with earth.
2.
Avoid cooking food enclosed in sealed containers, which could burst due to the
expansion of the air inside them.
3.
During use, metal utensils that could overheat should not be placed on the hob,
such as cutlery, forks, ladles or lids.
4.
Do not place the hob on flammable or heat-damaging surfaces or materials.
5.
Avoid inserting any metal objects into the hob through the ventilation slots.
Otherwise, short circuits or a fire may occur.
6.
If you detect any damage to the hob, such as cracks or chips on the outside,
immediately disconnect it from the power outlet and contact an authorized
Technical Assistance Center.
7.
In automatic operation it is not possible to deactivate the timing and it is not
possible to adjust the power and temperature.
8.
In manual operation, power or temperature adjustment and timer setting are
available.
9.
Overheating protection: This appliance is equipped with overheating protection. If
the pan overheats, the appliance switches off automatically, the buzzer can sound
an alarm. If so, wait a few minutes and let it cool down. After that, the appliance
will work without problems.
10. This appliance can become hot during use. Do not touch the surface.
INSTRUCTIONS FOR USE
1.
Connect the hob to a power outlet.
As soon as you insert the plug of the power cord into a 220-240V, 50 / 60Hz socket,
the hob beeps and the internal fan starts briefly.
2.
Place the food to be cooked in the pan and place it on the hob.
The pan must be centered on the hob.
3.
Switch the device on by lightly pressing the "ON / OFF" switch with your finger.
4.
Start the induction by pressing the "Function" button, the display shows by default
the power at 1600 for the left plate or 1200 for the right one. Press + or - to choose
between the power settings (from 200 to 1800W for the left plate, and from 200 to
1300W for the right one).
5.
Press the "Function" button again to go to the temperature indication, set by default
to the maximum value of 240 ° C. Press + or - to choose between temperature
settings (60 to 240 ° C).
6.
Press the "Timer" button: 0:00 appears on the display. Press + or - to set the desired
time (max 3 hours); however, if no key is pressed, no time limit is set.
7.
At the end of the set time, the appliance turns off.
Note: In order not to interrupt the cooling of the inside of the hob, it is recommended not to
disconnect it from the power socket while the fan is running.
17
Publicidad
