Publicidad
Idiomas disponibles
Idiomas disponibles
3.
PRODUCT DESCRIPTION
EN
1.
Drinking spout cover
2.
Lid
3.
Handle strap
4.
Cup with MAX mark
5.
Cup base cover
4.
BEFORE FIRST USE
4.1. UNPACKING
1.
Unpack the appliance and all the accessories.
2.
Check for damage that may have occurred during transport. If the appliance or any accessory
is damaged or missing, do not use the appliance and return it to the dealer immediately.
3.
Before first use, follow the instructions in the CLEANING AND CARE section to clean all parts.
4.2. CHARGING THE SMOOTHIE MAKER
1.
Connect the adapter plug to the power socket.
2.
Attach the other end of the cable to the USB-C charging socket on the base.
3.
The indicator light turns constantly red when charging and becomes constantly white when
the smoothie maker is fully charged.
4.
Charge the smoothie maker for 4 hours before first use. It takes up to 4 hours to fully charge
the appliance.
5.
When the battery is low, the indicator light displays red for 30 seconds.
6.
The smoothie maker can be used during charging.
5.
OPERATION
WARNING:
■
Always turn off and disconnect the appliance from the power outlet, before leaving the
appliance unattended, assembling, disassembling, cleaning, and after use.
■
Sharp spinning blades. Risk of serious injury! Never put your hands into the cup when it
is attached to the base.
■
Always use the smoothie maker with the lid in place.
5.1. USING THE SMOOTHIE MAKER
Place the appliance on a flat, stable, level and dry countertop.
1.
Make sure the smoothie maker is disconnected from the power outlet.
2.
Unscrew the cup base cover if it is attached to the cup.
3.
Screw the cup onto the base making sure it is firmly secured into place.
4.
Put the solid and then liquid ingredients in the cup. Do not exceed the maximum level (MAX)
indicated on the cup (350 ml).
5.
Screw the lid onto the cup making sure the drinking spout cover is firmly closed.
6.
Press the ON/OFF button twice to turn the smoothie maker on and start blending.
■ The white indicator light turns on during blending.
■ Each blending cycle lasts 30 seconds.
■ The white indicator light flashes 5 times to indicate the cycle is ending and then turns off.
7.
Press the ON/OFF button to stop blending at any time.
■ The white indicator light will turn off.
6.
Blade
7.
Base
8.
ON/OFF button with indicator light
9.
USB-C charging socket
10. USB-C charging cable with adapter plug
6
Publicidad
