Publicidad
4.11 SELECTING AND CONFIRMING OPTIONS
1. The Option Selection button can be used to select the following options in sequence
(from the top down):
Prewash: adds a stage before the main wash, lasting about 20 minutes at a tempera-
ture of 35°C. Suitable for loads of particularly dirty items.
Intensive: the max. temperature is changed to 60°C and the washing stage is ex-
tended to increase the effectiveness of the enzymes in the detergents. Suitable for
delicate but dirty items.
Easy iron: produces items which are less creased and easy to iron.
Water plus: Increases the amount of water used for washing and rinses.
In alternative Extra rinse: this option adds a rinse to the selected washing pro-
gramme.
Rapid: reduces the duration of the washing cycle. Suitable for small amounts of laun-
dry with only light dirt.
Buzzer: sets whether or not the buzzer will sound at the end of the cycle. The appli-
ance comes with the buzzer function "on".
2. To confirm the selected option, simply press the Confirm options button and the LED
of the option remains on.
3. To delete an option selection, simply return to the option with the Selection button and
press the Confirm options button. To annul all the options previously selected in a
single operation, simply hold down the Confirm options button for 4 seconds.
4. The Buzzer option retains its "on" or "off" status for subsequent cycles. It is only au-
tomatically switched to "off" if the Night Wash programme is chosen.
Options
Option selection
Confirm option
EN
Start Pause
18
Publicidad
