Ego Power+ HTA2000S Manual Del Usuario página 9

◾
Remove the battery pack before servicing, cleaning
or removing material from the tool.
◾
Replacement Parts - When servicing, use only
identical EGO replacement parts. Use of any other
accessory or attachment may increase the risk of
injury.
◾
Have your machine serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the machine is
maintained.
◾
Do not wash with a hose; avoid getting water in
motor and electrical connections.
◾
Store the tool in a dry and high or locked location
out of reach of children.
◾
If situations occur that are not covered in this
manual, use care and good judgment. Contact the
EGO Service Center for assistance.
◾
Save these instructions. Refer to them frequently
and use them to instruct others who may use this tool.
If you lend this tool to someone else, also lend these
instructions to them to prevent misuse of the product
and possible injury.
SAVE THESE INSTRUCTIONS
NOTE: SEE YOUR POWER HEAD OPERATOR'S
MANUAL FOR ADDITIONAL SPECIFIC SAFETY RULES.
SPECIFICATIONS
Blade Length
Cutting Capacity
Weight (Without battery pack)
Recommended Operating Temperature
Recommended Storage Temperature
Measured sound power level L
WA
Sound pressure level at
operator's ear L
PA
Guaranteed sound power level L
(measured according to 2000/14/EC)
Valuation of
vibration a
◾
The above parameters are tested and measured
equipped with power head PH1400E/PH1420E;
◾
The declared vibration total value has been measured
in accordance with a standard test method and may be
used for comparing one tool with another;
◾
The declared vibration total value may also be used in
a preliminary assessment of exposure.
NOTICE:
machine can differ from the declared value in which the
tool is used; In order to protect the operator, user should
wear gloves and ear protectors in the actual conditions
of use.
PACKING LIST
PART NAME
51 cm
Hedge Trimmer Attachment
26 mm
Wrench
2.20 kg
Blade Scabbard
0°C-40°C
Operator's Manual
-20°C-70°C
92.3 dB(A)
DESCRIPTION
K=2.72 dB(A)
(PH1400E)
KNOW YOUR HEDGE TRIMMER ATTACHMENT (Fig. A)
93.3 dB(A)
K=1.14 dB(A)
1. Cutting Blade
(PH1420E)
2. Quadrant
3. Trigger
80.4 dB(A)
4. Hedge Trimmer Shaft
K=3 dB(A)
5. End Cap
(PH1400E)
6. Adjusting Lever
85.3 dB(A)
7. Gear Case
K=3 dB(A)
8. Wrench
(PH1420E)
9. Blade Scabbard
10. Tip Protector (Optional, SOLD SEPARATELY)
95 dB(A)
WA
HEDGE TRIMMER ATTACHMENT — HTA2000S
Front-assist handle
h
Rear handle
The vibration emission during actual use of the
EN
2.8 m/s 2
K=1.5 m/s
2
(PH1400E)
4.8 m/s
2
K=1.5 m/s
2
(PH1420E)
3.0 m/s 2
K=1.5 m/s
2
(PH1400E)
4.0 m/s
2
K=1.5 m/s
2
(PH1420E)
QUANTITY
1
1
1
1
9