Publicidad
Idiomas disponibles
Idiomas disponibles
11. Push a clean cloth against the foam filter element to
remove unwanted oil.
12. Install the air filter in the opposite sequence.
To do a check of the V-belt
WARNING:
without the V-belt cover installed.
WARNING:
is cool before you examine the belt. The hot
parts can burn your skin.
WARNING:
replace the belt. There is a risk of injury.
1. Stop the engine.
2. Remove the V-belt cover.
Transportation
WARNING:
transportation. The product is heavy and can
cause injury or damage if it falls or moves
during transportation.
Transport wheels let you move the product manually for
shorter distances. For longer distances, lift the product
to move it or put the product on a vehicle.
CAUTION:
behind a vehicle.
1107 - 008 - 02.05.2024
Do not operate the product
Make sure that the product
Be careful when you
Transportation, storage and disposal
Be careful during
Do not tow the product
3. Examine the V-belt for damages and wear. Replace
the V-belt if it is necessary.
4. Examine the tension of the V-belt.
5. If the tension is not sufficient, do these steps:
a) Loosen the 4 bolts that hold the engine to the
bottom plate.
b) Move the engine rearward.
c) Make sure that the V-belt pulleys align and
tighten the 4 bolts.
6. Install the V-belt cover.
To lift the product
WARNING:
equipment has the correct specification to
lift the product safely. The type plate on the
product shows the product weight.
WARNING:
or near a lifted product.
WARNING:
product latches. Do not keep hands on the
lifting point. It can cause injury.
Make sure that the lifting
Do not walk or stay below
Be careful when the
15
Publicidad
