Publicidad
Idiomas disponibles
Idiomas disponibles
LG ThinQ Application Features
Washer Cycle (Remote Start, Downloaded)
Set or download any preferred cycle and operate by
remote control.
Tub Clean Coach
This function shows how many cycles remain before
it is time to run the Tub Clean cycle.
Smart Diagnosis™
This function provides useful information for
diagnosing and solving issues with the appliance
based on the pattern of use.
Energy Monitoring
The washer energy usage is affected by the cycles
and options so you may see some changes in energy
usage from one cycle to another.
Push Alerts
When the cycle is complete or the appliance has
problems, you have the option of receiving push
Settings
Set the product nickname and delete product.
NOTE
If you change your wireless router, Internet service
provider, or password, delete the registered
appliance from the LG ThinQ application and
register it again.
This information is current at the time of publication.
The application is subject to change for product
improvement purposes without notice to users.
SMART FUNCTIONS
Using Washer Cycle
Remote Start
Use a smart phone to control the appliance remotely
or check to see how much time is left in the cycle.
Using Remote Start
1
Press the Power button.
2
Load the laundry.
3
Press and hold Remote Start button for 3
seconds to enable the Remote Start function.
4
Start a cycle from the LG ThinQ application
on your smart phone.
NOTE
Once the Remote Start mode is enabled, you can
start a cycle from the LG ThinQ smartphone
application. If the cycle is not started, the machine
will wait to start the cycle until it is turned off
remotely from the application or the Remote Start
mode is disabled.
When Remote Start is turned on, the door is
automatically locked.
Disabling Remote Start
When the Remote Start is activated, press and hold
the Remote Start button for 3 seconds.
Downloaded
Download new and specialized cycles that are not
included in the standard cycles on the appliance.
Appliances that have been successfully registered
the appliance.
Only one cycle can be stored on the appliance at a
time.
Once cycle download is completed in the appliance,
the appliance keeps the downloaded cycle until a
new cycle is downloaded.
19
Publicidad
