Publicidad
Idiomas disponibles
Idiomas disponibles
en-us_main.book.book Page 34 Monday, February 26, 2024 2:45 PM
34 MAINTENANCE
6
Reassemble the plug onto the drain hose and
reclip the drain hose.
7
Insert the drain pump filter and twist it
clockwise.
8
Close the drain pump filter cover.
NOTE
• A Drainage message appears on the display
when the drain pump filter is clogged with dirt.
Clean the drain pump filter.
Care in Cold Climates
Storing the Washer
If the washer will not be used for an extended
period and is in an area that could be exposed to
freezing temperatures, follow these steps to
protect the washer from damage.
NOTE
• Make sure the drum is empty before following
these steps.
1
Turn off the washer, and unplug the power
cord.
2
Turn off the water faucets.
3
Disconnect the water inlet hoses. Drain any
water from the hoses.
4
Plug the power cord into a properly grounded
electrical outlet.
5
Add 1 gallon of nontoxic recreational vehicle
(RV) antifreeze to the empty drum and close
the door.
• Never use automotive antifreeze.
6
Turn on the washer and press the Spin
button.
7
Press the Start/Pause button to start the
drain pump for 1 minute.
• This will expel some of the antifreeze,
leaving enough to protect the washer from
damage.
8
Turn off the washer and unplug the power
cord.
9
Dry the drum interior with a soft cloth, and
close the door.
10
Store the washer in an upright position.
11
Remove the inserts from the dispenser. Drain
any water in the compartments and let them
dry.
12
To remove the antifreeze from the washer
after storage, run the Rinse+Spin cycle using
detergent.
• Do not add laundry to this cycle.
Publicidad
