Gladiator Flex Cabinet System I Instrucciones De Ensamblaje página 17

INSTALL CABINET TO GLADIATOR
NOTE: Flex Brackets are sold individually and Gladiator
GearWall panels are sold separately.
®
NOTE: . For installation of the Gladiator
please refer to the manual instructions included with the
Gladiator GearWall panels.
® ®
Install the 24" 1-drawer 2-door
Base Cabinet
The GearWall
®
installed with the spacing as shown.
Install two brackets to the base cabinet. (see instruction on
■
Page 15)
Hang the base cabinet onto the GearWall
■
Make sure both brackets are fully engaged in the slots as
■
shown. Install the drawer back to the base cabinet. (See
instruction on page 18)
GearWall panels,
® ®
27"
panels should be
panels.
®
PANEL
®
Install the 24" Wall Cabinet
Install the bracket to the wall cabinet. (see instruction on Page
■
13)
Hang the wall cabinet onto the GearWall
■
Make sure the bracket is fully engaged in the wall slots as
■
shown. Tighten the pre-attached M6 x 16 hex socket head
screws fully into the bracket and make sure they go into the
wall slots.
GEARWALL
®
Tighten the M6 x 16 hex socket
head screws from the inside of
the wall cabinet
® panels.
®
17