GB/IE
GB
IE
NESTING SIDE TABLES
Assembly instructions
1. Introduction ..........................................................8
2. Safety ...................................................................8
3. Scope of delivery (fig. A) ...................................8
4. Technical specifications ......................................9
5. Safety information ...............................................9
6. Assembly ..............................................................9
7. Maintenance ........................................................9
8. Cleaning and care instructions...........................9
9. Disposal ..............................................................10
10. Warranty ............................................................10
11. Warranty conditions .........................................10
12. Distributor ...........................................................10
13. Service address .................................................11
1. Introduction
Congratulations!
With your purchase you have opted for a high-qual-
ity product. Familiarize yourself with the product
before using it for the first time. Please read the fol-
lowing assembly instructions carefully. Only use the
product as described and for the specific areas of
application. They contain important information for
safety, use and disposal. Familiarise yourself with all
of the operating and safety information before using
the product. Keep these assembly instructions in a
safe place. Also provide all of the documentation
when passing the product on to third parties.
Explanation of symbols
The following symbols and signal words are used in
these assembly Instructions, on the product or on the
packaging.
Hereinafter, the Nesting side tables will be referred
to as product.
WARNING!
!
This signal symbol/word indicates a hazard with a
high level of risk which, if not avoided, may result in
death or serious injury.
CAUTION!
!
This signal symbol/word indicates a hazard with a
low level of risk which, if not avoided, may result in
minor or moderate injury.
8
NOTE!
This signal word warns of possible property damage
or provides you with useful additional information
regarding the use.
This symbol indicates additional information.
This symbol indicates interior use only.
This symbol indicates potential danger to
children.
This symbol indicates how the product may
be loaded.
This symbol indicates how the product may
not be loaded.
This symbol indicates that the product is not
a climbing aid.
This symbol indicates the maximum load
max.
weight.
kg
These symbols inform you about
the disposal of the packaging
and product.
02
HDPE
This symbol provides information about the
www.fsc.org
FSC
certificate.
®
100 %
Holz
Wood
Bois
FSC
C124851
®
2. Safety
Intended use
The product is not intended for commercial use. Dif-
ferent use or a modification to the product are not
deemed as intended use and may lead to risks, such
as injuries and damage. The distributor assumes no
liability for damage that results from improper use.
The product is exclusively suitable for interior
use.
3. Scope of delivery (fig. A)
1x Table top large table A
1x Table top small table B
1x Frame large table C
1x Frame small table D
1x Floor frame large table E
1x Floor frame small table F