Publicidad
Idiomas disponibles
Idiomas disponibles
14 | English
Product features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
a)
(1) Saw blade
(2) Adjustable base plate
(3) Locking sleeve for saw blade
(4) Saw blade receptacle
(5) Hex key
(6) Utility hook
(7) Lock-off function for on/off switch
(8) On/off switch
(9) Orbital action adjusting lever
(10) Rechargeable Battery release button
a)
(11) Rechargeable battery
(12) Handle (insulated gripping surface)
(13) Base plate screw
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
Technical data
Reciprocating saw
Article number
Rated voltage
A)
No-load stroke rate n₀
Tool holder
Stroke
Max. cutting depth
– in wood
– in steel (unalloyed)
– pipe diameter
Weight according to EPTA-Pro-
cedure 01:2014
Recommended ambient tem-
perature during charging
Permitted ambient temperature
C)
during operation
and during
storage
Compatible rechargeable bat-
teries
Recommended rechargeable
batteries for maximum perform-
ance
Recommended chargers
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
8.0Ah.
B) Depends on battery in use
C) Limited performance at temperatures < 0 °C
1 609 92A 757 | (25.03.2022)
Noise/vibration information
Noise emission values determined according to
EN 62841‑2‑11.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 86 dB(A); sound power level
97 dB(A). Uncertainty K = 5 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841‑2‑11:
Cutting boards with saw blade S 2345 X:
a
= 18.7 m/s
h,B
Cutting wooden beams with saw blade S 2345 X:
a
h,WB
The vibration level and noise emission value given in these
a)
instructions have been measured in accordance with a
standardised measuring procedure and may be used to com-
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
power tool is used for other applications, with different ap-
plication tools or is poorly maintained, the vibration level
and noise emission value may differ. This may significantly
increase the vibration and noise emissions over the total
GSA 18V-28
working period.
3 601 FC0 0..
To estimate vibration and noise emissions accurately, the
times when the tool is switched off or when it is running but
V=
18
not actually being used should also be taken into account.
−1
min
0–2900
This may significantly reduce vibration and noise emissions
SDS
over the total working period.
mm
28
Implement additional safety measures to protect the oper-
ator from the effects of vibration, such as servicing the
power tool and application tools, keeping their hands warm,
mm
230
and organising workflows correctly.
mm
20
mm
150
Rechargeable battery
B)
kg
3,5–4,6
Bosch sells some cordless power tools without a re-
chargeable battery. You can tell whether a rechargeable bat-
°C
0 to +35
tery is included with the power tool by looking at the pack-
aging.
°C
–20 to +50
Charging the battery
Use only the chargers listed in the technical data. Only
u
these chargers are matched to the lithium-ion battery of
GBA 18V...
your power tool.
ProCORE18V...
Note: Lithium-ion rechargeable batteries are supplied par-
ProCORE18V...
tially charged according to international transport regula-
≥ 5.5 Ah
tions. To ensure full rechargeable battery capacity, fully
charge the rechargeable battery before using your tool for
GAL 18...
the first time.
GAX 18...
GAL 36...
Inserting the Battery
Push the charged battery into the battery holder until it
clicks into place.
(triax vector sum) and uncertainty K
h
2
2
, K = 1.5 m/s
,
2
2
= 23.1 m/s
, K = 1.5 m/s
.
Bosch Power Tools
Publicidad
