Publicidad
Idiomas disponibles
Idiomas disponibles
EN
3 Functions and operating procedures
3.1 Getting started
Connect the power supply → Turn the switch to ON → the power indicator lights up → press
for 3
seconds → the screen lights up and displays "ON", the stove starts to light up.
Note: During the first use of the new stove, there will be a little smoke and an acrid smell: this is due to the
heating of the paint and oil on the plate.
3.2 Shutdown
for 3 seconds → the screen displays "off", which means that the stove enters the stop phase,
Press
the screw motor stops loading the pellets, the extraction motor and the convection motor continue to operate
until the stove cools down and the flue gas temperature is below 50°C, then the stove enters HOLD mode.
The screen is as follows:
3.3 Menu
1. Press the key
:
Publicidad
