SANNOVER ANITA 6 KW Manual Del Usuario página 50

EN
Cleaning the smoke duct inside the fireplace
The steps of the operation are as follows:
1. Take the deflector with both hands, lift it first and then take it out and forward.
2. Open the stove door and take out the crucible and ash pan.
3. Loosen the fixing screw using a 4 mm internal hex key and a Phillips screwdriver, respectively.
4. Take out the fire deflector and the cover plate from the ash release.
5. Use the vacuum cleaner to absorb the ash from the stove into the inner duct.
6. After cleaning, proceed with the installation in the reverse order, ensuring that the deflector and the ash
release cover plate are firmly in place and sealed.