OPERATING INSTRUCTION
EN
MULTIFUNCTIONAL TOASTER IK2503
GENERAL DESCRIPTION
1. Locking tab
2. Handgrip
3. Cover
4. Indicator light - power supply
5. Indicator light - thermostat
6. Removable plates
INTENDED USE
The IDEAL IK2503 3in1 multifunctional toaster is able to replace up to 3 appliances, often found in in modern
kitchens. This is possible thanks to its 3 types of interchangeable plates, with which a traditional sandwich
toaster can be transformed into a grill or a waffle maker. This is an ideal space-saving solution for the kitchen.
SETTING UP THE APPLIANCE
- Make sure that the appliance, the plug and the power cord are in order and that all parts of the packaging have
been removed before you start using the appliance.
Important: The appliance may give off a smell while being used for the first time. The smell is associated
with the manufacturing procedure. It is a natural process which ceases to occur after a certain period
of time. Ensure a suitable ventilation in the room, e.g. by opening a window. Use the toaster with any
food products while using it for the first time.
- The appliance is equipped with 3 types of hotplates (6):
• sandwich plates (A)
• grilling plates (B)
• waffle plates (C)
- To remove the plates, push the buttons (photo 2).
- To insert the plates, push their lower edges into the holes in the housing - (photo 3).
USE
- Place the appliance on a flat, stable and heat-resistant surface.
- Fit the appropriate hotplates (6) and grease.
- Close the lid (3), making sure the catch (1) is properly closed.
- Switch the appliance on to the mains in accordance with the parameters given above.
The indicator light (4) will illuminate.
- The appliance is warming up. The indicator light (5) indicates that the appliance has reached the required
temperature.
- Prepare the products.
- When the appliance has reached the required temperature, open the lid (3) by pulling the catch (1), place the
products and close the lid (3).
ATTENTION: Do not put in products that are too thick. The lid (3) and the catch (1) must not close with
difficulty. There is a risk of damage to the appliance.
- During cooking, the indicator lamp (5) lights up and goes out. The thermostat maintains the correct
temperature.
- Check the baked state of the products by carefully opening the lid (3).
ATTENTION: The steam coming out of the appliance is hot - use caution!
- Remove the finished products. To avoid damaging the hotplates, use wooden or heat-resistant plastic cutlery.
- When preparing subsequent batches of products, close the lid (3) to maintain the temperature.
- When toasting is complete, unplug the appliance from the mains.
10
A. sandwich plates
B. grilling plates
C. waffle plates
TECHNICAL DATA
power: 800W (max 1300W)
supply voltage: 220-240V ~ 50-60Hz