Publicidad
Idiomas disponibles
Idiomas disponibles
Front & Rear support
You can put the iron on the front & rear support during operation and you can
also secure the iron into front & rear support for storage after finishing ironing.
Temperature dial
Turn the dial to set ironing temperature to meet the garment changed.
Temperature indicator
When the iron is heating up, the temperature indicator will be illuminated. Once
the iron has reached the selected temperature, it will extinguish. The indicator
will be cycled on and off as the iron maintains the selected temperature during
ironing.
Steam trigger
Press the steam trigger with a little force, the steam will be sprayed from the
soleplate continuously. When loosen the steam trigger, the appliance can only
be used for dry ironing without steam.
Cord clamp
When not in use, the power cord and supply cord shall be stored. Pull out the
cord clamp first, after winding the cords around the cord winding groove,
push the cord clamp back.
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp
cloth for several minutes for the purpose of removing any residue on the
soleplate according to the section of "Steam ironing".
NOTE: It is normal that strange odor comes out from the unit for the first use.
This will cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the iron
for the first time. This is normal; the particles are harmless and stop coming out
of the iron after a short while.
NOTE: When you switch on the appliance, the steam station iron may produce
a pumping sound. This is normal; the sound tells you that water is pumped into
the soleplate.
NOTE: During the heating process of the soleplate, there will be little steam
coming out from the soleplate automatically and this phenomenon will continue
for about 3 seconds, This is normal.
Publicidad
