Publicidad
Idiomas disponibles
Idiomas disponibles
3) The supply cord may become hot during a long ironing session.
4)The appliance may not release steam if appropriate soleplate temperature
has not achieved or correct temperature setting has not been selected. (there
is no steam released under temperature setting 1 and 2.)
5)The water tank may need to be refilled if the pump produces larger noise.
8. After ironing, you can put the iron the thermal insulating cushion. Remove
the plug from the wall socket. But the soleplate is still hot, never touch it with
hand, place it on the thermal insulating cushion until it cools down completely.
9. And you can hold the iron in vertical position and press the steam trigger to
iron hanging curtains and clothes (jackets, suits, coats).
NOTE: Do not continuously operate the appliance for 1 hour.
10. The iron has an anti-drip function. When the soleplate is in the low
temperature condition, no matter if press down the steam trigger or not, there
will be no steam produced to avoid water droplets coming out from the
soleplate, and the steam can be produced again when the soleplate being in
the high temperature condition.
CLEANING AND MAINTENANCE
Before cleaning, firstly disconnect the power outlet and let the appliance cools
down.
1. Wipe flakes and any other deposits on the soleplate with a damp cloth or a
non-abrasive (liquid) cleaner.
NOTE: Do not use chemical, steel, wooden or abrasive cleaners to scrape the
soleplate.
2. Clean the upper part of iron with a soft damp cloth. Wipe the water drop on
the steam station iron and the thermal insulating cushion with dry cloth.
3.When do not use the appliance for a long time, pour out the water in the tank,
and store the iron on the thermal insulating cushion.
4. Wind the iron cord and power cord around the cord winding groove and
secure it by the cord clamps.
IRONING TIPS
-Always check first whether a label with ironing instructions is attached to the
article. Follow these ironing instructions in any case.
-The iron heats up quicker than cooling it down, therefore, you should start
ironing the articles requiring the lowest temperature such as those made of
synthetic fiber.
-If the fabric consists of various kinds of fibers, you must always select the
lowest ironing temperature to iron the composition of those fibers.
-Silk and other fabrics that are likely to become shiny should be ironed on the
Publicidad
