Publicidad
Idiomas disponibles
Idiomas disponibles
14
MAINTENANCE INSTRUCTIONS
1. Make sure that the inlet and outlet grills are clear of dust and
lint for proper operating performance.
2. Your interchangeable hot air blow dry brush is virtually
maintenance free. No lubrication is needed.
3. Always remove the plug from the outlet and allow
the dryer to cool before cleaning.
4. Use a soft cloth or a small brush to remove dust and lint that
may have accumulated on the rear filter of
the dryer.
5. The interchangeable hot air blow dry brush exterior may be
wiped clean with a damp cloth.
6. CAUTION: Never allow the power supply cord to be pulled,
twisted or severely bent. Never wrap the cord tightly around
the dryer. Damage will occur at the high flex point of entry
into the interchangeable hot air blow dry brush, causing it to
rupture and short. Inspect the cord frequently for damage.
Stop use immediately if damage is visible, if the unit stops or if
it operates intermittently.
7. If the cord or interchangeable hot air blow dry brush is
damaged or does not operate properly, return it to a service
center for repair.
8. This interchangeable hot air blow dry brush has no user
serviceable parts. Do not attempt to repair the appliance
yourself.
9. Remove hair from the brush after every use. To keep bristles in
best condition let unit cool before storing.
When not in use, your interchangeable hot air blow dry brush
should be disconnected and stored in a safe, dry location, out of
reach of children. Do not wrap the cord around the dryer. Allow
the cord to hang or lie loose and straight at the point of entry into
the interchangeable hot air blow dry brush.
T3 AIREBRUSH DUO
STORAGE
Publicidad
