Olympia CPD 5212 Instrucciones De Uso página 7

Intended use
This printing calculator should be used exclusively for business
indoors. Any other use is considered unintended use.
General information/Safety notes
Your calculator is a highly sophisticated piece of equipment. Never
try to repair it yourself. If repairs are necessary, give the calculator
to an authorized service center or your sales outlet.
Never insert metallic objects such as screwdrivers, paper clips,
etc. into the calculator. They may damage the cash register and
present the danger of causing an electric shock.
Always switch off the calculator after having finished your work.
Clean the calculator by dusting it with a dry cloth. Never use water
or solvents, such as paint thinner or alcohol, to clean the calcula-
tor.
In order to completely disconnect the cash register from the power
supply, disconnect the power plug from the mains socket.
Do not expose the cash register to excessive heat.
Transport protection locks
Before starting to operate the calculator, remove any transport pro-
tection locks and keep them for future use. If the calculator is
subsequently moved, the transport locks must be reinstalled.
Important transport note:
In the case of damage caused during transport, the unit must be
returned with the packaging, operating instructions and accesso-
ries.
Connection to the power supply
Before connecting the calculator to the power supply, check that
the voltage and frequency specifications on the rating plate corre-
spond to the local power supply.
Safety note:
The power socket must be located close to the calculator and be
easily accessible. This enables the calculator to be disconnected
from the power supply quickly in an emergency.
Warning! Risk of suffocation through small parts, packaging and
protective foils! Children can swallow small parts, packaging and
protective foils. Keep the device and the packaging materials out
of reach the children.
Caution! Risk of injury through moving and sharp parts! When
the device is in operation, never insert your hands, fingers or
loose pieces of clothing in the printer mechanism. Close the cover
of the printer before putting the device into operation.
Caution! Risk of injury through sharp edges! Take particular care
when adjusting the paper on the tear-off rail.
6
B.1 View of machine CPD 5212
1 Function keys /
Sliding switches
2 Display / hinged
3 Tear- off rail
4 Paper support
5 Paper roll holder
Note:
All data is retained following disconnection from the power supply.
Printer
Caution: Observe the following information to ensure long, trouble-
free operation:
Never
– print when no paper is inserted.
– pull the paper when the printer is in operation.
– use poor quality paper or color ribbons.
– use used paper rolls a second time .
– manipulate the printer mechanism with hard objects or move by
hand.
Pay attention to the end of paper markings.
Change the paper roll immediately.
Have the cash register/printer serviced regularly by an authorized
service center.
Change the ribbon when the print quality starts to deteriorate.
Congratulations
on having chosen an office calculator from the
Olympia CPD range.
The machine is equipped to execute and print all practical arithme-
tical problems.
Switching to Display Mode enables the machine to be used purely
as a display calculator.
This instruction manual is divided into 3 chapters
A. Contents
B. Starting up
C. Appendix
and will help you to learn all the features of your calculator quickly
and easily.
Examples of the calculation procedures are shown at the back of
this manual.
GO Europe GmbH
Zum Kraftwerk 1, 45527 Hattingen (Germany)
A. Contents
A. Contents
B. Starting up
B.1 View of machine
B.2 Unpacking and assembling
B.3 General information
B.4 Keyboard summary
B.5 Sliding switches
B.5.1 Point selection
B.5.2 Rounding selection
B.5.3 Operating mode and item counter selection
B.5.4 Currency conversion mode and tax calculation mode selec-
tion
B.6 Display indicators
C. Appendix
C.1 Changing the ink roll
C.2 Maintenance
C.3 Technical data
C.4 Warranty
C.5 Disposal
C.6 Cleaning
6 Cover plate
7 Connection port
8 On/Off switch
9 Function keys
10 Number keys