Orbis TUO GSM Manual De Uso página 58

To define the recipients of the alarms:
SEND ALARM MAXIMUM [index] .... [index]
SEND ALARM MAXIMUM [index] .... [index]
SEND ALARM POWER [index] .... [index]
[index] = is the position in the phonebook of the number to which to send the alarm SMS
For example:
SEND ALARM MAXIMUM 2 4
when a maximum alarm occurs, the device sends a message to the numbers saved
in the phonebook in position 2 and 4.
SEND ALARM MINIMUM 1 2 3
when a minimum alarm occurs, the device sends a message to the numbers saved
in the phonebook in position 1, 2 and 3.
SEND ALARM POWER 1
when a power failure occurs, the device sends a message to the number saved
in the phonebook in position 1.
Note: a new recipient configuration overwrites the previous one. For this it is
necessary all recipients must be entered in a single command.
For example, after sending the following two messages:
SEND ALARM MAXIMUM 2 4
SEND ALARM MAXIMUM 3
the device sends the maximum alarm only to the recipient 3 (thus canceling the
recipients 2 and 4).
To ensure that no message is sent in the event of an alarm, use the commands:
SEND ALARM MINIMUM EMPTY
SEND ALARM MAXIMUM EMPTY
SEND ALARM POWER EMPTY
- 56 -
OB327200 Chronothermostat User Manual