Reduced
Automatic, 1x closing.
Drive power
g. MENU FACTORY RESET
Change with
from NO to YES. 3 seconds
settings are deleted.
h.MENU TIME ZONE
Time zone A, time zone B, ... time zone O (total of 15 time zones).
Open the programming of the 1st time zone with
You can assign these to different users under MENU e.
Scroll through the days with
Time from
format [hh:mm],
cancel
confirm
i.MENU HISTORY
Shows the events of the drive, e.g. user 1 unlocked.
Note: the last event is shown, with
Maximum of 32 events are shown, whereby the latest overwrites the oldest. The entry
„admin" is logged in the event log for unlocking without a code or automatically locking.
cancel
confirm
j. MENU SETUP
Greeting
Signal
Display light time
cancel
confirm
Locking is reduced to one-speed (e.g. one-speed even for two-speed
locking and opening of the door). We recommend permanent two-speed
locking.
cancel
confirm
Setting the drive speed. (The "Automatic" setting should be
set permanently.)
Automatic, Maximum.
cancel
confirm
cancel
.
sets the day as active (X) or inactive ( ).
-
0
9
Assignment of the characters see
character with
Cancel with
Configuring the acoustic feedback
The display light time can be selected with
afterglow time.
confirms. Factory reset is performed. All
. Set the different access times.
, to
format [hh:mm],
one can switch to the event before the last event.
5.3
. Save the name with 3 seconds
.
-
.
0
9
e. Continue to next
.
on, off, low.
from 2-10 seconds +
21