sWaP GD97705 Manual De Instrucciones página 100

 Do not wear loose clothing or jewellery that can be
drawn into the air inlet. Keep long hair away from the
air inlets.
 Operate the machine in a recommended position and
only on a firm, level surface.
 Do not operate the machine on a paved or gravel
surface where ejected material could cause injury.
 Before using, always visually inspect to see, that the
shredding means, shredding means bolts and other
fasteners are secure, the housing is undamaged and
that guards and screens are in place. Replace worn or
damaged components in sets to preserve balance.
Replace damaged or unreadable labels.
 Never operate the machine while people, especially
children, or pets are nearby.
Operation
 Before starting the machine, make certain that the
feeding chamber is empty.
 Keep your face and body away from the feed intake
opening.
 Do not allow hands or any other part of the body or
clothing inside the feeding chamber, discharge chute,
or near any moving part.
 Keep proper balance and footing at all times. Do not
overreach. Never stand at a higher level than the
base of the machine when feeding material into it.
 Always stand clear of the discharge zone when
operating this machine.
 When feeding material into the machine be
100