Lenco KCR-150 Manual De Usuario página 7

Setting the clock
When the unit is in Standby press and hold the "CLK SET/MEM" button. The hour on the display will
1.
begin ashing.
2. Press the "SKIP/TUNE
Press the "CLK SET/MEM" button again to adjust the minutes. The minutes on the display will begin
3.
ashing.
4. Press the "SKIP/TUNE
5. Press the "CLK SET/MEM" button to nish setting the time or wait for the display to stop.
Setting the Timer
1. Press the "TIMER" button. At the display the TIMER indicator will ash.
2. Press the "TIMER" button to adjust the timer in increments of 10 minutes.
3. Press the "SKIP/TUNE
4. Wait until the display stop ashing
5. After the set time has expired the device will sound an alarm.
Disabling the timer
To cancel the alarm after it has sounded press the "POWER" button or the "TIMER" button.
To cancel the timer before the alarm has sounded press the "TIMER" button until the display shows "000" and
the timer light is no longer lit.
1. Turn the device on and press the "SOURCE" button to switch to CD mode.
2. Press the "OPEN/CLOSE" button to open the CD tray.
3. Place a CD into the tray with the label side facing up.
4. Press the "OPEN/CLOSE" button again to close the CD tray. The CD will starts playing automatically.
5. Press the "PLAY/PAUSE" button to interrupt the playback. Press the button again to resume playing.
6. Press the "SKIP/TUNE
7. Press the "STOP
Programming a CD
1. Press the "STOP
2. Press the "PROG" button.
3. "Prog" will begin to blink on the display.
4. Press the "SKIP/TUNE
5. Press the "PROG" button to save the selected track to the program.
6. Repeat step 4 and 5 to program up to 20 tracks.
7. If you are ready press the "PLAY/PAUSE" button to start playing the programed titles.
Repeat Function
Repeat one track on Music CD
1. During CD playback press the "SKIP/TUNE
2. Press the "REPEAT" button until the "
repeatedly.
3. To cancel the setting press the "REPEAT" button continuously until the "
disappear.
Repeat the entire DISC
1. During CD playback press the "REPEAT" button continuously until the "
display. The unit will play all tracks on the disc repeatedly.
2. To cancel the setting press the "REPEAT" button continuously until the "
disappear.
/
" buttons to adjust the hour.
/ " buttons to adjust the minutes.
/
" buttons to adjust the timer in increments of 1 minutes.
CD OPERATION
/
" buttons to select a track.
" button to stop the play mode.
" button to stop the CD during play.
/ " buttons to select a track.
1" indicator shows on display. The unit will play the selected track
CLOCK
TIMER
/
" buttons to select the track which you want to repeat.
6
1" or " ALL" indicators
ALL" indicator shows on the
1" or " ALL" indicators