Publicidad
Idiomas disponibles
Idiomas disponibles
START OF DISHWASHER
The followings should be checked before starting the dishwasher:
1. Whether the dishwasher is level and fixed
2. Whether the inlet valve is opened
3. Whether there is leakage at the connections of the conducts
4. Whether the wires are tightly connected
5. Whether the power is switched on
6. Whether the inlet and drain hoses are knotted
7. All packing materials and printings should be taken out from the dishwasher
ATTENTION
After installation, please put this manual into the bags of printings.
The content of this manual is very helpful to the users.
TROUBLESHOOTING TIPS
ERROR CODES
When some malfunctions happen, the appliance will display error codes to warn you.
WARNING!
If overflow occurs, turn off the main water supply before calling a service. If there is water in
the base pan because of an overfill or small leak, the water should be removed before
restarting the dishwasher.
AVAILABILITY OF SPARE PARTS
1. Seven years after placing the last unit of the model on the market: Motor, circulation and
drain pump, heaters and heating elements, including heat pumps (separately or
bundled), piping and related equipment including all hoses, valves, filters and aqua
stops, structural and interior parts related to door assemblies (separately or bundled),
99
Publicidad
