ring Stick Up Cam Guía De Configuración página 7

Swivel the base so the long side
1
faces the front.
Insert and drive the security screw
2
into the base screw location
with a standard Phillips-head
screwdriver (not included).
Turn your Stick Up Cam over to
3
access the battery compartment
screw hole, and drive the second
security screw.
12
How to install Stick Up Cam on a wall:
Remove the base. Unscrew it using a
standard Phillips-head screwdriver
(not included).
Re-attach the base. Screw it into the back
of your Stick Up Cam with the "UP" arrow
on the bracket pointing upward.
13