Publicidad
Idiomas disponibles
Idiomas disponibles
1
4
7
OPERATING INSTRUCTIONS: DRY VACUUMING
The vacuum should be used with the included 2-in-1 crevice tool and brush. For use with the
tool:
1. Verify that the vacuum is turned off. Remove the front cover (Fig. 1).
2. Insert the tool into the end of the dust cup until secured in place (Fig. 2).
3. The tool can be used as a crevice tool or as a dusting brush. To use as a dusting brush, simply
squeeze the release button and shift the brush forward to the end of the tool until a click is heard (Fig. 3).
To return the tool to crevice tool mode, press the release button and slide the brush down the tool
until it clicks into place.
Use the tool in crevice tool mode to clean between tight spaces. Use in dusting brush mode for
cleaning loose surfaces such as drapes.
4. Turn the vacuum on by pressing the On/Off button and begin vacuuming (Fig. 4).
5. After use, turn the vacuum off. Remove the tool from the dust cup by pulling it out (Fig. 5).
6. Remove the dust cup by rotating it counter-clockwise and pulling the dust cup away from the
vacuum. Remove the reusable washable filter and the filter holder. Refer to page 10 for removal
instructions.
7. Empty the dust cup, clean and dry the inside and outside before storage (Fig. 6 & 7).
IMPORTANT!
The vacuum is designed for dry vacuuming only. Do not use this vacuum for cleaning up liquids.
2
5
8
3
6
8
Publicidad
