Danfoss ComLynx Datalogger Guía Rápida página 10

Functionality
Yes
No
It is also possible to carry out a manual network search. For this the tab page 'Settings → Data
logger → Inverter' needs to be opened:
By clicking on 'Networkscan' the network will be scanned for connected inverters.
By means of the number it can be checked if all connected inverters have been found. Additionally
the logging interval can be configured (default is 10 min).
The data recording begins as soon as the inverters have been found. With every logging cycle an
audio signal is given. This signal can be switched off if desired.
4.3. Add Additional Sensors
To log data from additional sensors such as directed radiance, these must be configured. This is
done on the 'Sensors' tab page.
The exact procedure can be found in the user manual.
4. First Connection to the Data Logger
Description
Starts inverter search and data logging.
Opens 'My plant' without carrying out the inverter search.
C00410333-01
4
9