Publicidad
Idiomas disponibles
Idiomas disponibles
Instruction Manual
- Insert the bit or accessory into the drill/driver chuck and
firmly tighten it turning it clockwise.
3. Using the trigger:
- It is a variable-speed trigger that enables the user
to control the speed according to the pressure on the
trigger.
4. Chuck rotation direction switch:
- The drill/driver rotation direction switch has tree
operation positions.
Left
position
Central
Right
position
42383/216 - 12 V Cordless Drill
Left position: counterclockwise rotation dire.
Central position: trigger locking.
Right position: clockwise rotation direction.
5. Set the work torque:
- Torque ranges can be selected with the torque selector
ring located on the front of the drill/driver.
- The torque selector ring has 19 positions for
screwdriving and one position for drilling.
Torque is directly proportional to the selected position.
The greater the number selected with the torque selector
ring, the greater the tool torque will be.
- The torque position can be identified by the arrow on
top of the tool.
NOTE: always select a low torque position for
screwdriving work in soft material, very high torques
can damage the screw thread or the work piece.
21
Publicidad
