Publicidad
Idiomas disponibles
Idiomas disponibles
▪ Make sure that the ventilation slots are not clogged. Do
not place any objects over the slots;
▪ Drills and the combi drill itself may become too hot
during operation. Avoid touching them, they can cause
severe burns;
▪ Make sure that you don't damage the electrical circuits,
gas and water pipes when operating the equipment. Any
damage to these installations can cause fire, explosion,
electric shock or property damage;
▪ Avoid using the combi drill on surfaces coated with
paints containing lead or other materials harmful to
health. Any contact or inhalation of dust may cause
allergic reactions and / or breathing disorders. Wear a
mask and work with a dust extraction device if the power
tool allows so;
▪ Materials containing asbestos cannot be worked.
Asbestos is carcinogenic.
Before
performing
cleaning,
changing, repairing and maintenance tasks, you must
remove the battery.
Replace worn out or damaged parts immediately, so that
the power tool is always in a safe operating condition.
Cleaning:
The power tool must be thoroughly cleaned after each use.
Do not use aggressive cleaning products. These products
may damage plastics and metals, compromising the safe
operation of the power tool.
Maintenance:
Only maintenance works described in this instruction
manual may be carried out, all other works must be
performed by an official distributor.
Keep all screws well tightened in order to ensure a safe
operation.
adjusting,
accessories
If any components or safety devices are removed for
maintenance
works,
immediately and correctly.
Use only VITO-approved tools for this machine or
technically identical parts. Failure to do so may result in
personal injuries or damages to the combi drill. If in doubt,
if you lack knowledge or resources, you should contact an
official distributor.
The combi drill should only be serviced by the brand's
technical assistance center, or other qualified personnel,
replacing any necessary parts with original ones.
1. Insert the battery (7) on the groove and slip it all the way
until you hear a "click" noise from the lock/unlock
button (8). At this point, the battery is locked in place;
2. To remove the battery, press the lock/unlock button and
pull out the battery.
Use VITO 20V lithium-ion batteries.
1. Place the battery (7) in the charger in the same way as
you would place it in the appliance;
2. Plug the charger into the socket and let it charge.
Sometimes at the end of charging, both the battery and the
charger can be hot, which doesn't mean they malfunction.
Let the battery cool down before putting it in the combi drill.
they
must
be
repositioned
Publicidad
