Publicidad
Idiomas disponibles
Idiomas disponibles
The rotation speed increases as you press the "ON/OFF"
button.
Do not operate the combi drill at low speed for a long period
of time.
The drill can operate in three different modes, drilling,
impact drilling and screwdriving.
▪ The drilling mode (
metal and wood, plastic, PVC and other materials;
▪ The impact drill mode (
in concrete, stone and masonry;
▪ The screwdriving mode (
screws;
1. To select the desired mode, turn the operation mode
selector (3) according to the type of work to be
performed.
Before performing any checking, maintenance or cleaning
task, remove the battery from the combi drill.
The combi drill does not require any additional lubrication
or servicing. For a continuous and trouble-free operation,
you
must
perform
maintenance tasks.
Cleaning
After each use, clean all the components of the combi drill.
Clean the combi drill with a clean, damp cloth blow it out
with compressed air at low pressure.
Careful handling protects the power tool and extends its
service life.
The power tool and its ventilation slots must be kept clean.
Clean the ventilation slots regularly or whenever they
become blocked.
) is suitable for drilling work on
) should be used when drilling
) allows you to tighten/loosen
regular
cleaning
and
Storage
When not in use, store the combi drill in a dry, clean place,
free of corrosive smoke and out of children's reach.
The packaging is made up of recyclable materials,
which you can dispose on local recycling points.
Never dispose of power tools with your household
waste!
According to the European Directive 2012/19/EC on
electrical and electronic equipment waste and its
transposition into national law, power tools must be
collected separately and delivered to the collection sites
intended for this purpose.
You can get information regarding the disposal of the power
tool through the person in charge for recycling in your city.
WhatsApp:
E-mail:
proper
+351 967 817 569
support@vito-tools.com
Publicidad
