hillvert HT-HBC-500 Manual De Instrucciones página 18

Technical Data
Description of the
parameter
Product name
Model
Dimensions [Width x Depth x
Height; mm]
Weight [kg]
Engine type (model)
Motor power [W].
Displacement volume [cm3]
Maximum motor speed [rpm]
Engine idle speed [rpm]
Fuel tank capacity [L]
Fuel type
Energy consumption [g/kWh]
Oil type
Gearbox grease
Sound Power Level Lwa [dB]
Starting cable length [mm]
Cutting width [mm]
Wheel size [mm]
1. General Description
The instruction manual is intended to assist in safe and reliable use. The product is
designed and manufactured strictly according to technical specifications using the
latest technology and components and maintaining the highest quality standards.
PLEASE CAREFULLY READ
AND UNDERSTAND THIS INSTRUCTION MANUAL BEFORE
OPERATION,
To ensure long and reliable operation of the unit, make sure to operate and maintain it
properly in accordance with the guidelines in this instruction manual. The technical data
and specifications contained in this instruction manual are up to date. The
manufacturer reserves the right to make changes in order to improve the quality.
Taking the technical progress and the possibility of reducing noise into account, the unit
EN
Value of the
Handpush Brush Cutter
Air-cooled 2 stroke engine, 1 cylinder (1E44F)
Petrol ≤E10 (Fuelmix - Petrol 25:1 Motoroil)
Two-stroke FC/FD oil
parameter
HT-HBC-500
1245x450x980
14.1
1.6
51.7
8120
2990
1.2
620
Lithium
114
850
255/430
300