hillvert HT-HBC-500 Manual De Instrucciones página 32

Old fuel is one of the main causes of engine starting problems, so empty the fuel tank
if the unit will not be used for an extended period of time.
Store the unit indoors and protect it from rust.
3.6. Troubleshooting
Problem
The engine does not start
Efficiency decreases
Unit is very hot
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of electrical
and electronic equipment. This is indicated by the symbol on the product, operating
instructions or packaging. The materials used in this unit are recyclable according to
their marking. You will be making an important contribution to protecting our
environment by reusing, recycling or otherwise disposing of used units.
Your local administration will provide you with information about the
appropriate disposal point for used units.
EN
Action
Remove and reinstall the blade and
head.
Check fuel level.
Sharpen/replace the cutting element.
Switch off. Allow unit to cool completely.