Create WIND BRAID Manual Del Usuario página 13

NOTE: While installing or removing the light panel, carefully keep the insulation pads intact.
Turning the fixing screws too tight or too fast will damage the insulating pads.
5. Attach the light trim plate by screwing it
in by turning it clockwise.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous substances in elec-
tric and electronic equipment as well as their waste disposal. The symbol with the crossed dustbin shown on the package
indicates that the product at the end of its service life shall be collected as separate waste. Therefore, any products that
have reached the end of their useful life must be given to waste disposal centres specialising in separate collection of
waste electrical and electronic equipment, or given back to the retailer at the time of purchasing new similar equipment,
on a one for one basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible negative effects on the
environment and health and optimises the recycling and reuse of components making up the apparatus. Abusive disposal
of the product by the user involves application of the administrative sanctions according to the laws.
6. Finally lower the wicker panel back down
and your fan is fully installed.
E NGLI SH
13