Tognana IRIDEA D2DTU04IRZU Manual De Usuario página 19

ASSEMBLY
1. Place the appliance on a flat and stable surface.
2. Place the container on the motor body by aligning the two tabs of the container with the slots in
the motor body. Rotate clockwise to secure the container until you hear a click.
3. Carefully lift the blade assembly by holding it from the shaft and insert it onto the central shaft of
the container, securing it by pressing downwards until you hear a click.
4. Place the processing lid on the container by aligning the slots in the bottom of the lid with the tabs
on the top of the container, rotate clockwise until you hear a click.
DANGER! The blades are very sharp! Be very careful when
handling the blades!
IMPORTANT NOTES ON CORRECT USE
If the appliance is not properly assembled, it will not operate.
with two interlock systems that prevent the unit from operating if the lid or container is removed. Do not
attempt to start the unit without the lid or container correctly positioned and locked.
OPERATION
IMPORTANT NOTE:
Do not operate the appliance with the empty container.
During the initial use, the appliance may emit smoke and/or
a slight odor. This is normal and will quickly disappear after a few
uses.
1. Add the food to be chopped into the container. Do not overfill the container, but consider that at the
end of the processing, the food should not exceed 2/3 of the container's volume.
2. Secure the lid properly by locking it in place.
3. This food processor has two speeds:
- Puree: for a smoother and homogeneous result (ground)
- Chop: for a coarser result (chopped)
4. Press and hold the "chop" or "puree" button for the desired time. Releasing the button will stop the
appliance.
5. Lift the blade before emptying the container.
DANGER! When the appliance is turned off, the blade
continues to rotate for a few moments: do not touch with your
hands.
DANGER! Do not chop extremely hard foods such as ice
cubes, nutmeg, coffee beans and cereals.
For safety reasons, this unit is equipped
19