Selecting The Range; Understanding The Display; Display Features - ADInstruments AD71B Manual De Usuario

_____________________________________________________________________
STO
(UT71B
only)
RCL
(UT71B
only)
MAX MIN Chapter 2 Getting Acquainted – Using MAX MIN
REL

Selecting the Range

Press RANGE to select either a fixed range or the autorange feature.
Autoranging (AUTO lighted in the display) always comes on initially when you select a
new function. In autorange, the Meter selects the lowest input range possible,
ensuring that the reading appears with the highest available resolution.
If AUTO is already on, press RANGE to enter MANUAL ranging in the present range.
You can then select the next manual range each time you press RANGE. Return to
autoranging by press EXIT.
Note that there is no MANUAL ranging on REL feature.

Understanding the Display

Display features are shown in Figure 2-2 and described in Table 2-4.
No. Symbol
MAX
MIN
1
AVG
No
2
©Copyright Abacanto Digital SA.
The current The value of the
measurement corresponding
reading index number
The recalled The total number of
value stored value.
The present The stored value
measurement
value minus the
stored value
Figure 2-2. Display Features
Table 2-4. Display Features
Maximum reading displayed.
Minimum reading displayed
Average reading displayed
The sequence of the reading.
Manual de usuario AD71B
Meaning
AD Instruments
Index number increase
one.
Index number:
no.0001~no.0100
Index number:
no.0001~no.0100
The present
measurement value.
50