GE 21 Manual Del Propietario Y Instalación página 26

Installation Instructions
REPLACING THE FREEZER DRAWER
(on some models)
I
o Two people may be required to complete
this procedure.
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
[] Pull out the rail assemblies to the full
length on each side of the cabinet.
[] Drive the top screw into the door on each
side until it is 1/2 way in.
[] Hang the drawer front onto open slots on
the slides.
• Slot
[] ATTACH AND SECURE THE
DRAWER FRONT TO THE SLIDES
(CONT.)
[] Drive screws fully. (There are 10 screws.)
Step D2:
Drive
fully•
Step D3:
Drive
screws
in these
holes.
-- Step DI:
Line up
screw
hole in
freezer
drawer
and
drive
fully.
[] REPLACE THE FREEZER BASKET
Replace the lower freezer basket by
lowering it into the frame.
_\\\\\
\
\
26