EN
AUTOMATIC PAPER DISPENSER
AUTOMATIC PAPER DISPENSER
The length of paper towels can be adjusted from 15 to 60 cm. To adjust it:
• 1st Move switch "G" to top position (ON Mode)
• 2nd Press the "C" button. The saved paper length will be displayed on the
screen in cm
• 3rd Press the "E" button to increase the length of the paper towel (maximum
60 cm) Press the "F" button to decrease the length of the paper towel (minimum
15 cm)
• 4th Once paper-towel length has been selected, close the front cover
6.5 DETECTION DELAY SETTING
In order to avoid accidental activation or misuse of the paper dispenser, time
delay between services can be adjusted. During the programmed period, the
dispenser will not supply paper even if you put your hand in front of the sensor.
Time delay can be set between 1 and 6 seconds.
To set time delay:
• 1st Press the "D" button
• 2nd Press the "E" button to increase time delay
• 3rd Press the "F" button to decrease time delay
• 4th Close the cover
6.6 ECO MODE
You can use the ECO mode to save energy and maximize battery life. When ECO
mode is selected, the dispenser will automatically deliver a hand towel each time
paper comes out.
The hand detection sensor will remain disconnected when ECO mode is selected.
To activate ECO mode:
1. Move the "G" switch to the lower position
2. Close the cover
Page 12