A
Regulatory instructions
Read the user manual after reading this regulatory
warning booklet.
Safety instructions
• Please read the instructions carefully before using the unit
and keep them for future reference. Should the unit be given
to someone else, please include this user manual too.
• This product is only suitable for indoor use, yet should also not
be used in any mould-prone areas, such as bathrooms.
• The light should be placed on a flat, dry and clean surface. Do
not cover the light and keep it away from curtains, bedding, etc.
• It is forbidden to put anything on the product or hang anything
from certain parts.
• Warning! Make sure that the cable is correctly positioned in
such a way that it does not pose any danger (prevent the cable
from being slack, forming loops or getting pulled/trapped
somewhere).
• The light can be cleaned with a clean, dry cloth. Do not immerse
it in water.
• To avoid the risk of an electric shock, do not touch the "ON/
OFF" switch. Should the switch become loose or damaged, the
product must be disposed of.
• If the power cable is damaged, it must be replaced by a cable
or special set available from the manufacturer or their after-
sales service.
•
The product must be placed at least 1 m away from the
1 m
surface to be illuminated.
• Install the product in a well-ventilated location to ensure a good
ventilation. Leave a gap of at least 0.5 m between the product
and any wall.
• Do not look directly into the light beam.
• Regularly check the safety glass for cracks or other signs of
damage. Should the glass become damaged, please dispose
of the product.
18
EN