Publicidad
Idiomas disponibles
Idiomas disponibles
C
Product usage
Display
Description
DMH
DMX
d001...d512 DMX
rESt
Reset
rSt
Mechanical reset
Fact
Restores to the default factory
settings
Pro
Expert mode
diSP
Display direction
ndS
Normal display
rdS
Inverted display
dmch
DMX channel
9CH
14CH
PAn
Maximum rotation angle
P180
180°
P360
360°
P540
540°
Pdir
Panning direction
nPan Normal panning direction
rPan Reverse panning direction
tilt
Maximum tilt angle
t90
90°
t180
180°
tdir
Tilt direction
ntil
Normal tilt direction
rtil
Reverse direction
DMX
Accessories required (not included):
•
Interconnect cable (signal cable)
•
DMX controller
Connect a signal cable from the controller output to the first light's INPUT.
•
Connect another signal cable from the OUTPUT of the first light to the INPUT of the
second light.
•
Repeat the above step to connect all the slave lights.
Further information
Select and confirm a DMX address.
Make sure that this number matches the
configuration of your DMX controller.
All old settings will be deleted.
Expert mode allows you to manually
adjust the tilt, pan, angles and any other
movement or behaviour.
If you would like to control the unit via
a DMX controller, you can also choose
between the 9-channel and 14-channel
settings (see "DMX control: 9 channels/14
channels").
24
EN
Publicidad
