C
Product usage
Use
Place the light on a level surface.
To assemble
WARNING
• Always unplug the power plug from the mains socket
before assembling the product.
• Use a live wire detector to ensure that no electric cables
are running behind or through the surface.
Loosen the 2 screws on the light's base. Install the mounting bracket on the unit's base.
Always secure the unit by means of a hook-compatible safety rope (not supplied).
Attach a hanging hook (included) to the unit's mounting bracket.
Hang the hook with the unit fixed to the base, then secure the hook in place with a suitable
screw and nut (not included).
Connect the unit's power cable to an appropriate mains socket. After a few seconds, the
unit will be ready for use.
Note : The appropriate fastening systems vary according to the mounting surface's
composition.
Numerical values indicated on the display
Display
Description
Auto
Automatic mode
Slou
Slow
FASt
Fast
SoUn
Sound
Sound
Sound
Slav
Slave mode
chil
Child
mast
Master
Further information
The unit works in automatic mode at either
a slow or fast speed.
The unit displays a rhythmic sequence of
colours over the sound.
Child: The unit copies the movements and
effects of a connected Master unit.
23
EN