Descargar Imprimir esta página

Jackery Explorer 1000 Manual De Instrucciones página 7

Ocultar thumbs Ver también para Explorer 1000:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 43
LCD Screen On/Off
To turn on, press the Main Power Button or when there's a charging input, the screen display will light up
automatically. To turn off, press the Main Power Button again and the screen display will turn off.
LCD is off automatically
If there is no operation in 2 minutes, the product will enter a sleep state and the screen display will
automatically turn off.
Turn on/off the Always-on Display
After the display screen lights up, double-click the Main Power Button and the Always-on display
mode will be on, then press it again to turn off the screen.
Tip: During Always-On Display mode, the screen automatically turns off after 2 hours without charging
or discharging.
LED Light
The LED light has three modes: Low Light mode, High Light mode, and SOS mode.
Press the LED light button and the LED light will turn on. The default mode is Low Light mode. Press the
LED button again to switch it to high light mode, SOS mode, or turn off the LED light in sequence. In any
of such modes, you can press and hold the LED button to turn off the LED light.
1.
Low Light mode
APP CONNECTION
This product supports the connection of Jackery App for intelligent control and operation. Users can
download the Jackery App through App Store or Google Play. For more information, please refer to
Jackery App User Manual.
CHARGING YOUR JACKERY EXPLORER 1000
Fully charge the device before its first use.
Note: 1. The recommended charging temperature for the product is between 0°C to 45°C (32°F to 113°F),
and the discharging temperature is between -10°C to 45°C (14°F to 113°F). Operating the product
outside this temperature range may restrict its charging and discharging capabilities, or even render it
unable to charge or discharge.
2. The charging power and battery capacity of the product may vary due to temperature fluctuations.
Charging via AC Wall Outlet
Connect the AC charging cable to the input port of the power station and plug it into the wall
outlet.
(under charging or discharging state), follow these steps:
2.
High Light mode
SOS
3.
SOS mode
GB
05

Publicidad

loading

Este manual también es adecuado para:

Je-1000d