Descargar Imprimir esta página

GE Profile ULTRA OPAL 2.0 XPIO13SWBB Manual Del Propietário página 40

Publicidad

Idiomas disponibles

Idiomas disponibles

Partes Incluidas
Porta Cucharas de Hielo
OPAL Ice Maker Quickstart Guide
IMPORTANT: Read and understand all safety instructions detailed in Owner's Manual before
using the Opal.
Cleaning the Ice Bin and Water Reservoir
Remove the ice bin and wash with warm soapy water, then rinse thoroughly. Use a damp sponge to
wipe down the water reservoir under the ice bin. Never use soap inside your Opal icemaker.
Rinsing Opal's Internal Components
1. Fill the water reservoir to the upper fill line.
See Figure 1.
2. Plug in Opal, Press Power Button to turn on
and then hold the 'Clean' button for 3 seconds
Figure 1
to initiate the cleaning process.
See Figure 2.
Water
Reservoir
Fill Line
3. Water will begin circulating and the 'Cleaning'
indicator will light up on the left-hand side of
the unit to confirm the unit is now in cleaning
process. See Figure 3. After a few minutes the
Figure 2
water will stop and the 'Cleaning' indicator light
will turn off.
Clean
Light
4. When the 'Cleaning' indicator light turns off,
Hold 3 Sec
drain the Opal. Unhook the top of the drain
hoses at the back of the unit. See Figure 4.
Figure 3
Making Ice
Defrosting
Figure 4
49-1000499 Rev. 0 03-20 GEA
Guía de inicio rápido
4
Power
Add Water
Cleaning
Cuchara de hielo
Bandeja de goteo
la base
Clip de tanque lateral
Cubo de hielo
Filtro de Agua
49-9000222 Rev. 3

Publicidad

loading