Publicidad
Idiomas disponibles
Idiomas disponibles
F. When the last REST is reached ,this mode is stop directly.
G. If no single input in 5Min, buzzer rings 0.5s enter into standby mode.
H. Press the "START" key once, enter into the break mode and press "START" to continue running.
I. Press the "STOP" key to sound the buzzer for 0.5s and enter into the stop mode.
J. If the result of movement is displayed, press "STOP" key to leave and return to stand by mode.
INTERVAL CUSTOM
Figure 14
Figure 15
E. Press "ENTER" confirmed, meanwhile with a short buzzer rings 0.5s, LCD display "01/XX" ("01"is flashing).
The "WORK" icon is flashing one time every 1s with buzzer sounds ( shining 0.75s/ put out 0.25s) , "TIME" icon
counts down from the setting value, DISTANCE, CALORIES, WATTS, SPEED, PACE count up according the
operation.
F. There is set RSET time, matrix displays 01/XX(part 01 is flashing), "REST" icon keep flashing, the buzzer rings for
0.25s every second.
G. "Work" and "REST " display in cycle , cycle count increase 1 every time till reach to 08/08 (total cycle counts 8
times). Buzzer rings 0.5s enter to stop mode. (The average value of the sports results is only calculated within the
Work time)
H. When the last REST is reached, this mode is stop directly.
I. If no single input in 5Min, buzzer rings 0.5s enter into stand by mode.
J. Press the "START" key once, enter into the break mode and press "START" to continue running.
K. Press the "STOP" bkey to sound the buzzer for 0.5 seconds and enter into the stop mode.
L. If the result of movement is displayed, press "STOP" key to leave and return to stand by mode.
Figure 16
13
A. Press "INTERVAL CUSTOM" key, enter to
this mode, LCD display
beeps 0.5s.
B. LCD display the presetting value 01, press
"UP or DOWN" key to setting (setting range
01~20), it is non-recyclable (figure 14).
C. Press "ENTER" confirmed, "WORK" icon is
flashing, LCD window "TOTAL TIME " display
the presetting value 0:30. Press "UP or DOWN"
key to setting (setting range: 0:05~30:00), it is
non-recyclable ( figure 15).
D. Press "ENTER" confirmed, "REST" icon is
flashing, LCD window "TOTAL TIME " display
the presetting value 0:20. Press "UP or DOWN"
key to setting (setting range: 0:05~30:00), it is
non-recyclable ( figure 16).
icon with buzzer
Publicidad
