Publicidad
Idiomas disponibles
Idiomas disponibles
TARGET TIME
G. If did not complete the setting in 30s, the buzzer rings for 0.5s and back to standby mode.
H. If the result of movement is displayed, press "STOP" key to leave and return to standby mode.
TARGET CALORIES
G. If did not complete the setting in 30s, the buzzer rings for 0.5s and back to standby mode.
H. If the result of movement is displayed, press "STOP" key to leave and return to standby mode.
TARGET DISTANCE
A. Press "TARGET TIME" key, enter to this mode, LCD flashing
display TARGET and TIME .
B. LCD "TIME" window display the presetting value 1:00 or the last
setting value. Press "UP or DOWN" key to setting (time range
1:00~1:59:00), it is non-recyclable .
C. After setting, press "ENTER" confirmed , TARGET and TIME icon
continue to flashing, meanwhile start to count down form setting
value.
D. Press the "START" key once, enter into the break mode and press
"START" to continue running.
E. Press the "STOP" key to sound the buzzer for 0.5s and enter into
the stop mode.
F. If no single input in 5Min, buzzer rings 0.5s enter into standby
mode.
A. Press "TARGET CALORIE" key, enter to this mode, LCD flashing
display TARGET and CALORIE.
B. LCD "CALORIE" window display the presetting value 20 or the last
setting value. Press "UP or DOWN" key to setting (setting range
1~2000), it is non-recyclable.
C. After setting, press "ENTER" to confirm, TARGET and CALORIE
icon continue to flashing, meanwhile start to count down form the
setting value.
D. Press the "START" key once, enter into the break mode and press
"START" to continue running.
E. Press the "STOP" key to sound the buzzer for 0.5s and enter into
the stop mode.
F. If no single input in 5min, buzzer rings 0.5s enter into standby
mode.
A. Press "TARGET DISTANCE" key, enter to this mode, LCD flashing
display TARGET and DISTANCE.
B . " D I S TA N C E " w i n d o w d i s p l a y t h e p re s e t t i n g va l u e
0.5KM/0.5Miles or the last setting value. Press "UP or DOWN" key
to setting (setting range 0.5~100), it is non-recyclable.
C. After setting, press "ENTER" confirmed, TARGET and DISTANCE
continue to flashing, meanwhile start to count down form the
setting value.
D. Press the "START" key once, enter into the break mode and press
"START" to continue running.
E. Press the "STOP" key to sound the buzzer for 0.5s and enter into
the stop mode.
F. If no single input in 5min, buzzer rings 0.5s enter into standby
14
Publicidad
