Publicidad
Idiomas disponibles
Idiomas disponibles
How to check the appropriate main
brush height
NOTICE:
Observe the appropriate height. Too
much pressure on the main brush accelerates the
wear of the main brush and shorten run-time.
A main brush track width indicates the appropriate
height of the main brush.
1.
Raise up the front of the appliance by holding
the grip or handle. Move the appliance to a flat surface
covered with the following materials, and then gently
lower the appliance onto the surface.
•
Layer of dust
•
Layer of chalk
2.
Turn on the ON/OFF switch and rotate the main
brushes approx. 15 - 30 seconds.
3.
Turn off the ON/OFF switch. Raise the front of the
appliance to prevent the main brush from contacting the
surface and move the appliance to another area.
Check that the main brush track is evenly rectangular,
25 - 40 mm (1" - 1-9/16") wide.
Readjust the height by using the main brush height
adjusting knob if the track shape is inappropriate.
2
Fig.17
► 1 . Layer of dust or chalk 2. Main brush (rear side)
3. Track
1
3
11 ENGLISH
Turning the side brush on or off
The side brush can be used to extend the cleaning
width and also used to clean the areas along walls.
To use the side brush, hold down the lock off button and
lower the side brush ON/OFF lever.
The side brush is lowered to the floor surface. When the
side brush is on, it rotates in conjunction with the main
brushes.
3
2
Fig.18
► 1 . Side brush 2. Lock off button 3. Side brush ON/
OFF lever
Raise the side brush ON/OFF lever when the side brush
is not in use.
The side brush is raised from the floor surface. When
the side brush is off, it does not rotate.
Fig.19
► 1 . Side brush 2. Side brush ON/OFF lever
1
2
1
Publicidad
