Publicidad
Idiomas disponibles
Idiomas disponibles
• PDC01
Fit the bottom edge of the portable power pack onto
hooks A and secure it in place with hooks C. Hook B is
not used.
1
Fig.42
► 1 . Portable power pack 2. Hooks A 3. Hooks C
2.
Align the triangle marks on the socket of the porta-
ble power pack and the plug of the adapter (for the XGT
battery) and fit them together firmly as far as they will
go.
2
1
Fig.43
► 1 . Socket of portable power pack 2. Plug of adapter
(for XGT battery) 3. Triangle marks
3.
Open the battery box cover.
Fig.44
► 1 . Battery box cover
2
3
3
3
1
4.
As shown in the figure, arrange the cord so it
passes through the groove in the multifunction adapter
and the battery box. Align the adapter (for the XGT
battery) with the groove in the battery insertion opening,
and insert the adapter until it clicks into place.
Fig.45
► 1 . Groove in multifunction adapter 2. Groove in
battery box 3. Adapter (for XGT battery)
5.
Close the battery box cover.
Removing a portable power pack
PDC1200 / PDC1500
1.
Remove the plug of the adapter (for the XGT
battery) from the socket of the portable power pack and
remove the cord.
NOTICE:
Do not pull the cord when removing
from the plug of adapter. Also, do not carry the
portable power pack by holding only the cord.
The cord may break or otherwise be damaged.
2.
While holding down the lock button of the portable
power pack, raise the handle of the portable power
pack.
1
Fig.46
► 1 . Portable power pack 2. Lock button 3. Handle
18 ENGLISH
1
2
3
2
3
1
Publicidad
