Descargar Imprimir esta página

Makita VS001G Manual De Instrucciones página 16

Barredora aspiradora inalámbrica
Ocultar thumbs Ver también para VS001G:

Publicidad

Idiomas disponibles

Idiomas disponibles

Removal
Reverse the steps of the attachment procedure.
Attaching a polyethylene bag
NOTICE:
When attaching a polyethylene bag, it may
be difficult to see inside of the dust bag.
Attaching a polyethylene bag to the dust bag gives
you the convenience when it is time to discard refuse,
because discarding work can be completed by simply
removing and throwing away the polyethylene bag with
its contents.
1.
Lift up the grip (for the dust bag) and remove the
dust bag.
1
2
Fig.35
► 1 . Grip (for the dust bag) 2. Dust bag
2.
Attach a polyethylene bag (commercial appliance,
bag opening perimeter is over 1,600 mm (63")) to the
dust bag.
Fig.36
► 1 . Polyethylene bag
3.
Attach the dust bag by hanging the hooks on the
left and right of the dust bag on the attaching grooves.
Using a multifunction adapter
Optional accessory
Attaching a multifunction adapter makes it possible to
mount a Makpac or portable power pack.
CAUTION:
adapter in place using the supplied screws.
CAUTION:
portable power pack in place by using the latches
or hooks on the multifunction adapter.
CAUTION:
more than 20 kg (44 lbs) or more on the multifunc-
tion adapter.
CAUTION:
or portable power pack mounted on the multifunc-
tion adapter to transport or operate the appliance.
Doing so may cause accidents.
CAUTION:
end when a Makpac or portable power pack is
mounted on the multifunction adapter. Doing so
may damage the locking mechanism of the multifunc-
tion adapter, and the Makpac or portable power pack
may fall off.
Attaching the multifunction adapter
1.
Align the protrusions on the left and right of the
multifunction adapter with the mounting grooves on the
appliance and attach the multifunction adapter.
1
Fig.37
► 1 . Protrusion 2. Groove 3. Multifunction adapter
If it is difficult to mount the multifunction adapter, loosen
the handle lock lever on the appliance. When loosen the
handle lock lever, fold down the handle to prevent the
handle from falling over, and then mount the multifunc-
tion adapter.
16 ENGLISH
Properly secure the multifunction
Properly secure the Makpac or
Do not place objects weighting
Do not use the handle of a Makpac
Do not stand the appliance on its
3
1
2

Publicidad

loading