Contact Information - Rockwell Automation Allen-Bradley 1609-PXBP Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 23
M
, S
AINTENANCE
Replacing the Battery Module
This UPS has an easy to replace, hot-swappable battery module. Replacement is a safe procedure,
isolated from electrical hazards. You may leave the UPS and connected equipment on during the
procedure. See your dealer for information on replacement battery mo dules.
Once the battery is disconnected, the connected equipment is not protected from
power outages
Be sure to deliver spent batteries to a recycling facility or ship to the manufacturer
in the replacement battery packing material.
Service
If the UPS requires service do not return it to the dealer. Follow these steps:
1.
Review the problems discussed in the Troubleshooting section of this manual to eliminate
common problems.
2.
If the problem persists, contact Rockwell Automation Customer Support.
Refer to Contact Information below.
3.
Pack the UPS in its original packaging.
§
Pack the UPS properly to avoid damage in transit. Never use Styrofoam beads for
packaging.
§
Damage sustained in transit is not covered under warranty.
Always DISCONNECT THE BATTERY(S) before shipping in compliance with U.S.
Department of Transportation (DOT) and IATA regulations.
The battery(s) may remain in the UPS.

Contact Information

Refer to Rockwell Automation at 440-646-5800.
,
C
ERVICE
AND
ONTACT
I
NFORMATION
8

Publicidad

Tabla de contenido
loading

Tabla de contenido