Rockwell Automation Allen-Bradley 1609-PXBP Manual Del Usuario página 7

R M C
ACK OUNT ONFIGURATION
Refer to the Installation Guide included in the Rail Kit for instructions on mounting the UPS and the
external battery packs into a rack.
NOTE: The external battery packs must be mounted below the UPS in the rack.
Installing and Connecting the External Battery Pack(s)
1. Connect the green/yellow ground wires (screws included), as shown in the diagrams below.
2. Connect the rear panel batteries as shown in the diagrams below.
TVSS Ground Wire Connections
Battery Connections
5